Model: Aseptic; Specifications:160、165、170、175、180、185.

[Sterilization method] Ethylene oxide sterilization [Product structure and composition] The product is a one-piece type, consisting of a hooded top and trousers; a hooded top and trousers are made of non-woven fabric; a zipper is made of nylon and zinc alloy; a sealing tape is made of non-woven fabric substrate and synthetic rubber hot melt Made of materials.

Size	Height	Bust	Sleeve Length	Cuff	Foot mouth
160	165	120	84	18	24
165	169	125	86	18	24
170	173	130	90	18	24
175	178	135	93	18	24
180	181	140	96	18	24
185	188	145	99	18	24

It is used to provide barrier and protection for the potentially infectious patients' blood, body fluids, secretions, etc. that clinical medical personnel come into contact with at work.

[Precautions]
1. The product is sterilized by ethylene oxide, which is a sterile product; one-time use, repeated use is prohibited.
2. Recommended usage time: no more than 12 hours.
3. Check the integrity of the package before use. If the package is damaged, it is strictly prohibited.
4. When it is contaminated by the patient's blood, body fluids and dirt, it should be replaced in time.
5. Dispose of the product in accordance with the requirements of the "Regulations for the Management of Medical Waste" after use.
6. The flame retardancy of the product has not been verified.
7. Protective clothing can only be put on and taken off in the specified area.
8. Before wearing, check whether the protective clothing is damaged; do not let the sleeve touch the face and collar when wearing. If leakage or damage is found, it should be replaced in time; when taking off, care should be taken to avoid pollution.

[Instructions]
1. Wear one-piece protective clothing should follow the order of wearing the bottom, then the top, then the hat, and finally the zipper.
2. When taking off the piece of protective clothing, first pull the zipper head, and take off the sleeves (Figure 2, Figure 3); take off the roll from top to bottom (Figure 4) ), The contaminated surface is inward until all are removed and placed in a medical waste bag (Figure 5).

[Storage and transportation conditions and methods]
It is recommended to store in a dry, ventilated, non-corrosive gas environment; away from fire and flammable materials. Pay attention to sun protection and rain during transportation.